-
1
- #1
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CDR on an OPT11 1
- Thread starter 1pzcomm
- Start date
LD22 PRT TYPE ADAN - see what TTY 2 has for USER
LD21 PRT TYPE CDB - look for the "PORT" prompt.
LD17 to add USER CTY to the TTY 2 (assuming it is not in use for another USER)
LD15 to add the PORT number (for example "2" for TTY 2)
LD21 PRT TYPE RDB look for CDR prompts & responses
LD16 to set CDR to YES on the trunk routes
All of this can be a hassle if you are unsure of what TTY does what.
GHTROUT.com | FAQs | Recent Replies
LD21 PRT TYPE CDB - look for the "PORT" prompt.
LD17 to add USER CTY to the TTY 2 (assuming it is not in use for another USER)
LD15 to add the PORT number (for example "2" for TTY 2)
LD21 PRT TYPE RDB look for CDR prompts & responses
LD16 to set CDR to YES on the trunk routes
All of this can be a hassle if you are unsure of what TTY does what.
GHTROUT.com | FAQs | Recent Replies
acewarlock
Technical User
Turn on in CDB assign port
RDB CDR (YES) YES to all types you want CDR on.
Setup in CFN a TTY port with (USER CTY)
CDR TTY port on Option 11C to Serial Port on Laptop.
Raw Text Data
Unless your a programmer, you would need a 3rd party program to do the sorting and reporting.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
RDB CDR (YES) YES to all types you want CDR on.
Setup in CFN a TTY port with (USER CTY)
CDR TTY port on Option 11C to Serial Port on Laptop.
Raw Text Data
Unless your a programmer, you would need a 3rd party program to do the sorting and reporting.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
Firebird Scrambler
Systems Engineer
There is a excellent excel program called CDR_Import. If you want a printout showing all of the captured data in an easy to read / amend format, then you just import the raw data into it. I think that you can get a copy at the site.
All the best
Firebird Scrambler
Meridian Programmer in the UK
Useful Nortel forum at
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian Programmer in the UK
Useful Nortel forum at
If it's working, then leave it alone!.
acewarlock
Technical User
Could not find CDR_Import, do you have a better URL?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
Firebird Scrambler
Systems Engineer
Sorry about the mixup. The program isn't there on the TSP Forum anymore. Hopefully you will get my email ok. Otherwise just email me at the link below.
All the best
Firebird Scrambler
Meridian Programmer in the UK
Useful Nortel forum at
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian Programmer in the UK
Useful Nortel forum at
If it's working, then leave it alone!.
acewarlock
Technical User
Thanks David
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
RPMcMurphy
Vendor
I have CDR turned on in the CDB, CTY on the TTY port, CDR YES on the route, and but do not get CDR records on the screen.
bigindian65
Technical User
You mapped it to the port of that tty right?
Mato' Was'aka
Mato' Was'aka
RPMcMurphy
Vendor
There are no BARS programmed, could that be the problem?
acewarlock
Technical User
NARS/BARS has nothing to do with it.
What TTY Port did you program with USER (CTY)? That is the TTY that will print the CDR.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
What TTY Port did you program with USER (CTY)? That is the TTY that will print the CDR.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
acewarlock
Technical User
Basic CDR is included on all Rls
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
acewarlock
Technical User
You forgot 5
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads