(CDR) How See PRI configuration done for type RDB

[markxus]

sorry for my english.. how i can see the rdb config in a PRI (route) for copy the same parameters in other PRI (route), i can change or add new route and config cdr "yes" in LD 16 (CHG or NEW).... BUT, WHERE I CAN SEE A CONFIG DONE?

I HAVE OPTION 11C, 3 PRI, I WISH SEE THE 2 FIRST CONFIGURATIONS FOR DO IT IN THE 3RD PRI, FOR ACTIVE CDR "YES" AND PUT IT THE SAME PARAMETERS, THANKS A LOT.

 

[dlesap]

LD 21
PRT
RDB
ROUT xx or <cr> for all routes

try also
LD 21
REQ LTM to view all the members of a route

LD 16 to create a new route
NEW
RDB
ROUT xx
and then copy all values of the found route

but you will have to have a PRI avaliable (LD 17), a DCH built(LD 17), and have to create associated members in LD 14

 

[johnpoole]

ld 16
chg
rdb
0
x (the route number)return down to cdr enter yes

ld 21
ltm
0
return

that will show the trunk members of each route..

are you adding a route or turning on cdr on route 3?

john poole
bellsouth business
columbia,sc

 

[markxus]

thanks very much dlesap, this was i need

LD 21
PRT
RDB
ROUT xx

now will can turn on cdr in rout 3 and put in the same parameters that show in rout 1 and 2, thanks.

other question.. how i can set de time?, hour and date, thaks.

 

[johnpoole]

ld 2
ttad
then

STAD 18 09 2006 13 14 24


and for adding cdr

ld 14
req; chg
type rdb
cust 0
route 3

then return down to cdr and answer that yes



john poole
bellsouth business
columbia,sc