CDP 1

[mixtrix]

Hi, guys
the question is:
why when i get the cdp in ld 87 for the dn 8790 work correctly:

REQ
DCH 44 UIPE_OMSG CC_SETUP_REQ REF 000000E4 CH 44 4 TOD 16:13:08 CK 9371930B
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:3024 NUM PLAN: PRIVATE TON: ESN CDP
CALLED #:8790 NUM PLAN: PRIVATE TON: ESN CDP

DCH 44 UIPE_IMSG CC_PROCEED_IND REF 000000E4 CH 44 4 TOD 16:13:08 CK 937193F2

DCH 44 UIPE_IMSG CC_ALERT_IND REF 000000E4 CH 44 4 TOD 16:13:08 CK 9371941F

DCH 44 UIPE_OMSG CC_DISC_REQ REF 000000E4 CH 44 4 TOD 16:13:12 CK 9371AB32
CAUSE: #16 - NORMAL CALL CLEARING

DCH 44 UIPE_IMSG CC_RELEASE_IND REF 000000E4 CH 44 4 TOD 16:13:12 CK 9371AB92

DCH 44 UIPE_OMSG CC_RELEASE_RESP REF 000000E4 CH 44 4 TOD 16:13:12 CK 9371AB92


while if i get the cdp all 87 in ld 87 this not work?
DCH 44 UIPE_OMSG CC_SETUP_REQ REF 000000E5 CH 44 3 TOD 16:14:14 CK 93739DBF
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:3024 NUM PLAN: PRIVATE TON: ESN CDP
CALLED #:87 NUM PLAN: PRIVATE TON: ESN CDP

DCH 44 UIPE_IMSG CC_PROCEED_IND REF 000000E5 CH 44 3 TOD 16:14:16 CK 93739E96

DCH 44 UIPE_IMSG CC_DISC_IND REF 000000E5 CH 44 3 TOD 16:14:16 CK 93739EAD
CAUSE: #1 - UNASSIGNED NUMBER

DCH 44 UIPE_OMSG CC_RELEASE_REQ REF 000000E5 CH 44 3 TOD 16:14:16 CK 93739EAE

DCH 44 UIPE_IMSG CC_RELEASE_CONF REF 000000E5 CH 44 3 TOD 16:14:16 CK 93739F07


when i digit 87 the call go down!
the configuration thath doesn't work in ld 87 is:
new
cdp
type: dsc
dsc 87
flen 4
rli 44

the configuration thath work in ld 87 is:
new
cdp
type: dsc
dsc 8790
flen 4
rli 44


TANK'S SO MUCH!

 

[GHTROUT]

I would try with FLEN=0

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[KCFLHRC]

Leave the flen alone and check your NCDP entry in ld 86 for cdp length

 

[GHTROUT]

And that is an ORDER

Here is a tip. Hover over the apostrophe of the username on a posters profile page to see what country they are in. THAT is how I knew about LD49.

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[mixtrix]

I tried to get FLEN=0 but doesn't work.
I printed the RLI in ld 86 but I' don't have see the prompt NCDP, where i have to check this paramiters?

I think thath in ld 49 is ok:
ld 49

DGT000
MEM AVAIL: (U/P): 49496554 USED U P: 1811674 304441 TOT: 51612669
DISK SPACE NEEDED: 502 KBYTES
REQ prt

TYPE fcr

CUST 0

CRNO 1


CRNO 1
INIT ALOW
DENY 1 4 4
1 6 6
1 7 6
1 7 0
8 9 9

MEM AVAIL: (U/P): 49496554 USED U P: 1811674 304441 TOT: 51612669
DISK SPACE NEEDED: 502 KBYTES
REQ prt

TYPE fcr

CUST 0

CRNO 0


CRNO 0
INIT DENY
ALOW 2 7
4 7
5 7
6 7
7 7
8 4
0 2
BYPS 3 3 5 5 4 8 1 8 6 1
3 3 5 5 4 8 1 9 1 2


so, whath can I check?
Thanks so much!!!!!!!!

 

[mixtrix]

I find the prompt NCDP, but looking ok....:

ESN004
REQ prt

CUST 0

FEAT esn


MXLC 100
MXSD 100
MXIX 100
MXDM 1000
MXRL 1000
MXFC 100
MXFS 100
MXSC 1000
NCDP 10
AC1 0
AC2 79
DLTN NO
ERWT YES
ERDT 3
TODS 0 00 00 23 59
RTCL DIS
NCOS 0 - 0
NCOS 1 - 0
NCOS 2 - 0
NCOS 3 - 0
NCOS 4 - 0
NCOS 5 - 0
NCOS 6 - 0
NCOS 7 - 0
NCOS 8 - 0
NCOS 9 - 0
NCOS 10 - 0
NCOS 11 - 0
NCOS 12 - 0
NCOS 13 - 0
NCOS 14 - 0
NCOS 15 - 0
NCOS 16 - 0
NCOS 17 - 0
NCOS 18 - 0
NCOS 19 - 0
NCOS 20 - 0
NCOS 21 - 0
NCOS 22 - 0
NCOS 23 - 0
NCOS 24 - 0
NCOS 25 - 0
NCOS 26 - 0
NCOS 27 - 0
NCOS 28 - 0
NCOS 29 - 0
NCOS 30 - 0
NCOS 31 - 0
NCOS 32 - 0
NCOS 33 - 0
NCOS 34 - 0
NCOS 35 - 0
NCOS 36 - 0
NCOS 37 - 0
NCOS 38 - 0
NCOS 39 - 0
NCOS 40 - 0
NCOS 41 - 0
NCOS 42 - 0
NCOS 43 - 0
NCOS 44 - 0
NCOS 45 - 0
NCOS 46 - 0
NCOS 47 - 0
NCOS 48 - 0
NCOS 49 - 0
NCOS 50 - 0
NCOS 51 - 0
NCOS 52 - 0
NCOS 53 - 0
NCOS 54 - 0
NCOS 55 - 0
NCOS 56 - 0
NCOS 57 - 0
NCOS 58 - 0
NCOS 59 - 0
NCOS 60 - 0
NCOS 61 - 0
NCOS 62 - 0
NCOS 63 - 0
NCOS 64 - 0
NCOS 65 - 0
NCOS 66 - 0
NCOS 67 - 0
NCOS 68 - 0
NCOS 69 - 0
NCOS 70 - 0
NCOS 71 - 0
NCOS 72 - 0
NCOS 73 - 0
NCOS 74 - 0
NCOS 75 - 0
NCOS 76 - 0
NCOS 77 - 0
NCOS 78 - 0
NCOS 79 - 0
NCOS 80 - 0
NCOS 81 - 0
NCOS 82 - 0
NCOS 83 - 0
NCOS 84 - 0
NCOS 85 - 0
NCOS 86 - 0
NCOS 87 - 0
NCOS 88 - 0
NCOS 89 - 0
NCOS 90 - 0
NCOS 91 - 0
NCOS 92 - 0
NCOS 93 - 0
NCOS 94 - 0
NCOS 95 - 0
NCOS 96 - 0
NCOS 97 - 0
NCOS 98 - 0
NCOS 99 - 0
ETOD
TGAR NO

I have the CDP 84 in ld 87:
new
cdp
dsc
dsc 84
flen 4
rli 44

And this work good. if I digit 84xx the call go fine....

any ideas?thanks

 

[SL1M1]

take out the DSC 8790 and leave 87 which covers all 87xx

Cheers!!

 

[GHTROUT]

How many digits will you have to dial to reach the distant end? If it is always four digits, then KCFLHRC was exactly right. I think he might suggest that it be NCDP 4.

--
Nortel Resources at GHTROUT.com World Famous!
--