CDP issue

[mikethephoneguy]

I have a PRI tie between two opt 11c running 4.5.
Site A can dial four digits to site B no problem
Site B has to dial the ACOD then the four digits to hit the set at Site A.

If i dial from Site B four digits the call goes to the 2250 at Site B.

 

[DFKSydney]

Seems that your CDP / RLB / is OOO

If your 4 digit code is in the CDP table, then have a look at the RLB and verify that the route selected is valid, and that there is no DGT (digit manipulation) that causes invalid numbers.

 

[RickyPone]

Can you use vacant number routing? That way if the dn doesn't exist on site b it will be forced to go to site a.