Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CDP / Caller ID question...

Status
Not open for further replies.

Spokes0831

Technical User
Mar 20, 2009
85
US
Hey all....
Trying to CDP a COT trunk and I keep getting a SCH0265 - DN not defined. I have the CDP extension already in place in CDP but will not let me change the ATDN in LD-14. I am trying to point my trunks from an old Nortel system to a Cisco Call Manager. It will work with an ACD built, but all my calls are showing "forwarded" and no caller ID. My goal here is to send over the COT calls from the Nortel to cisco and having proper calling ID, without a generic forwarded message. Anyone out there have this problem? Can someone point me in the right direction on achieving this scenario.
Thanks in advance!
 
I doubt CDP will ever work over COT trunks. However, you need to set AUTO = yes to get an auto terminate route.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top