Hi,
today is patch 1 for CDL 3xx and 7xx with Software Version 2.2 realeased.
Here is the fix list:
Problem Fix No customer DIMS Fix issue with the HBA WWPN spoofing that did not happen when the hardware was changed during upgrade. When exporting to ACSLS with more than 1,000 cartridges, the system hangs [141137] ACSLS: • Increase maximum supported volume for ACSLS library from 1000 to 1500. • Only inventory existing tapes in ACSLS library. • Increase maximum supported drives to 512. Tape goes to 5 Gb and was not able to expand [148568] COD fixes: • Fix issue with excessive CPU usage when expanding tapes. • Re-enable the COD after it has been disabled by the server because of expansion failure. You can re-enable the COD by overwriting, erasing the tape, or using the command echo enableTOD=TapeVID > /proc/tle • Prevent potential kernel panic that could happen during tape expand or shrink. Tapes in drives have a corrupted tape header [150684] Fix issue with tape header loss when upgrading the filemark while the tape is in a drive. Creating 128 import or export jobs causes a corrupt database on reboot. [150701] Limit the Import/Export job queue length to 127 to avoid database inconsistency. No customer DIMS HBE performance improvements.
Cheers Novelli
Novell Master CNE + CDE
today is patch 1 for CDL 3xx and 7xx with Software Version 2.2 realeased.
Here is the fix list:
Problem Fix No customer DIMS Fix issue with the HBA WWPN spoofing that did not happen when the hardware was changed during upgrade. When exporting to ACSLS with more than 1,000 cartridges, the system hangs [141137] ACSLS: • Increase maximum supported volume for ACSLS library from 1000 to 1500. • Only inventory existing tapes in ACSLS library. • Increase maximum supported drives to 512. Tape goes to 5 Gb and was not able to expand [148568] COD fixes: • Fix issue with excessive CPU usage when expanding tapes. • Re-enable the COD after it has been disabled by the server because of expansion failure. You can re-enable the COD by overwriting, erasing the tape, or using the command echo enableTOD=TapeVID > /proc/tle • Prevent potential kernel panic that could happen during tape expand or shrink. Tapes in drives have a corrupted tape header [150684] Fix issue with tape header loss when upgrading the filemark while the tape is in a drive. Creating 128 import or export jobs causes a corrupt database on reboot. [150701] Limit the Import/Export job queue length to 127 to avoid database inconsistency. No customer DIMS HBE performance improvements.
Cheers Novelli
Novell Master CNE + CDE
