Does anyone have definitive information on how the router sim is graded for the 640-607? Everything I have found seem unsubstantiated. For instance, is a command graded after hitting the enter key, or is the sim graded based on the end result? People seem to be of different opinions about whether you need to save changes to the running-config to NVRAM as well. Technically if you are asked to change the IP address of an interface and that is all you are asked to do, you needn't perform a copy run start.
Just curious if there is anything about this on Cisco's site. I haven't found anything to date.
TIA!
Just curious if there is anything about this on Cisco's site. I haven't found anything to date.
TIA!