Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CCNA playing CCIE for a while (6509 chassis)

Status
Not open for further replies.
Jan 7, 2011
66
US
I have configured and implemented a 6509 main switch as our main switch. It feeds 9 catalyst 3550 perimeter switches. My question is in regards to the supervisor modules I have installed. I have redundant Catalyst 6000 supervisor 2 modules. They both contain 2 fiber interfaces. They also have gauges on them that would indicate switch load. My question is, what are the fiber connections in the switch for? I have a 16 port fiber module that connects my satellite switches to the main switch, we are also a single vlan environment for now so all ports and cards are accesible via lan. Can anyone shed any light on these connections and or how to get the switch load indicators to work. I appreciate any help that can be offered.

Jim Rapier
"Money can't buy happiness, but it can buy a big ass boat and you can sail right up to it." - Johnny Depp
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top