Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CCNA Level not understanding routing on ASA 5515-X

Status
Not open for further replies.

Nate1827

Technical User
Aug 21, 2012
3
US
Hello,

I some how ended up getting stuck with 2 ASA 5515'x replacing out with some older baracuda FW's. I am having trouble just getting basic ripv2 routing to work between the interfaces. Is there something i am missing here please let me know! The routes aren't even showing in my routing tables on the router after i enter them in. Anyways i have to setup a failover & HA. PAT's and some VPNS. Anyone recommend best practice for this?

Thanks for anything. These things are nothing like switches / routers.

Thanks

Nate
 
RIP is RIP, so as long as you have more than one device on a common subnet and RIP is active, it should listen for the multicast updates (assuming v2). Do you have any firewalls between these devices blocking UDP/520?

Setting up failover, NAT, and RA VPN are a lot more involved so these should be tackled in separate posts. What version of code are you running?

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top