CCME BRI problem

[NORTELCS]

hi

i have problem wint ccme bri trunk when i am forwarding an Extension to an external number. if i am calling the extension from another extenstion it will call the number which is forward to but if i am call the extension from another PSTN number directly it will drop the call and i am getting the error in the captcher below


thanks.

Jul 14 15:05:23.626: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x05
Sending Complete
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x2183, '17583194'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '17561370'
Plan:ISDN, Type:National
Jul 14 15:05:23.646: ISDN BR0/1/1 Q931: TX -> CALL_PROC pd = 8 callref = 0x85
Channel ID i = 0x89
Exclusive, B1
Jul 14 15:05:23.666: ISDN BR0/1/1 Q931: TX -> DISCONNECT pd = 8 callref = 0x85
Cause i = 0x80BF - Service/option not available, unspecified
Jul 14 15:05:23.742: ISDN BR0/1/1 Q931: RX <- RELEASE pd = 8 callref = 0x05
Jul 14 15:05:23.746: ISDN BR0/1/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x85

 

[jeter]

Is this a local call or a LD call?

I see 17561370 as the called party!!!

What recording do you here from your provider?

This code needs to be looked at (Cause i = 0x80BF - Service/option not available, unspecified)




SPC NVARNG
Tek-TIP Member 19,650

 

[NORTELCS]

yes it is local caller id, nothing i am getting from the provider but only the call is disconected.

thank

 

[jeter]

verify your dial-peers and make sure that you are sending the proper amount of digits.. example: forward-digits 7


SPC NVARNG
Tek-TIP Member 19,650

 

[NORTELCS]

the dial peer is working fine when i am making normal outgoing call but the problem is only the call forward to external number, if i call the extension which is forwaded to and external number for another PSTN on the direct number the problem will come.