CCM to Meridan Voice Mail

[SSgt]

Hello, I have a CCM connected to an SL-100 and Meridian Mail. I have sucessfully tapped into the SMDI stream out of the Median Mail and sent it into the CCM serial port and am using the Cisco Messaging Interface to monitor the SMDI info and turn on/off the lights. I have this working on another similar system using Calegra VM. My question is on the calegra system the SMDI output is: (OP turn the light on RMV turns it off)

OP:MWI 3145351326!
RMV:MWI 3145351326!
RMV:MWI 3145351326!
OP:MWI 3145351429!

On the Meridian Mail the SMDI output is a bit more confusing...
MD0630018N4805124 4780316 - Call came to 4805124 from 0316
MWI4805124 INV - turn on lamp
MD0630011D 4805124 when I called into VM System
MWI4805124 INV - checked messages

Anyone have any ideas on how to make this work....and no the QSIG trunking doesn't work as there is no SL-1 in the mix.

Thanks!

 

[SSgt]

Update: I was tapped into the Switch side so I was monitoring the switch side messages, once I rolled the cable I was seeing the VM messages. Now it works, but I have another question....is there a way to send the CMI messages over an inter cluster trunk???

 

[SSgt]

Never Mind....turned QSIG on on the ICT and everything works