CCM Install on Compaq DL320

[ADB100]

Using the CCM 3.3(3) OS installation disks I should be able to install Windows 2000 using the Cisco automated setup since this is same platform as the older MCS 7825 model (

http://www.cisco.com/en/US/partner/products/hw/voiceapp/ps378/prod_brochure09186a0080107d79.html)

The particular model I have has the Wide/Ultra SCSI controller and NOT the ATA-100 IDE controller. Anyway the installation starts OK, detects the hardware and begins the re-image process using OS_Disk6. After the image has been copied it begins Windows 2000 Server OK but shortly after it blue-screens with an STOP INACCESSIBLE_BOOT_DEVICE message. I managed to get to the recovery console and this works OK but I assume I am missing some drivers or something since a normal MCS 7825 uses the IDE controller and not the SCSI one.

Does anyone know a way around this (apart from installing the IDE controller) as I would like to use the original Cisco install disks to get the OS on?

Thanks

Andy

 

[paspas]

You have to install win2000 server using SMART CD that comes with your Server DL320 !

 

[ADB100]

I have the SmartStart CD and I can install Windows 2000 quite easily from this but to get CCM to install I then need to hack the registry etc and in my experience this never works as well as a 'proper' CCM OS install using the Cisco Disks.
If you look on CCO you can install CCM on Customer Provided Servers as long as they meet the Cisco specifications. With the DL320 I believe it must have an IDE disk and NOT a SCSI one (which I have).

Any other takers?

Andy

 

[paspas]

I have install ccm 3.3(3) successfully in my DL320 (with regedit hack, not in proper way).
Its true i have IDE disk.