Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CCM 3.3.(5) to 4.1(3) Upgrade

Status
Not open for further replies.

bcibek

MIS
Nov 16, 2006
1
US
We have an MCS-7825h-3.0 server with OS 2000.2.6 running CCM 3.3(5). We want to upgrade to 4.1(3) and need to upgrade our OS in order to do so. We need to be at version 2000.2.7 at the latest only its not supported on our platform. What OS version do we need to install on our server to be able to upgrade to CCM 4.1(3)?

been racking my brain on this one :(
 
Minimum SQL 2k sp3 and OS 2000.2.7sr2 required prior to upgrading to 4.1(3)



As far as the servers they were EOL May 2006.
Check out the 7835-H2 for replacement.
Don't have to buy them from CISCO.

 
If the OS isn't supported, chances are CCM 4.1.3 isn't supported either.
 
The upgrade assitant utility can help you determine whether your system is ready for an upgrade. Its a non intrusive tool that will not effect the system's state. It should be ran on the publisher and all subscribers. The utility will not run if the server does not meet the minimum requirements. The utility version will match your upgraded version. If you are upgrading to ccm4.1(3), the utility's version will also be 4.1(3).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top