CC cannot track to Primary

[CaperJ]

I have a succession 1000 with a media gateway cabinet 1 with a tmdi in slot 11 the cc will not track to primary get a dti068


Any ideas


REQ prt
TYPE ddb

CC1 11
PREF CC1 11
SREF CC1 FREE RUN
CTRR NO

TRSH 00
RALM 3
BIPC 2
LFAC 3
BIPV 3 2
SRTK 5 30
SRNT 15 3
LFAL 17 511
SRIM 1
SRMM 2
ICS


.ssck 1
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - FREE RUN
PREF - 11
SREF - FREE RUN
AUTO SWREF CLK - ENBL
IP DB PORT 2 DSBL
MEDIA GATEWAY CLK SRC: CC

PRI* TRK LOOP 11 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - IDLE ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - IDLE ISA CH 20 - IDLE ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - IDLE ISA CH 24 - DCH 15
.

 

[CaperJ]

As a ref I put in a new CC and new tmdi same thing

 

[johnpoole]

ld 60
trk pck

john poole
bellsouth business
columbia,sc

 

[CaperJ]

tried that same error dti068

 

[johnpoole]

ld 60 stat... are you trying to clock off of a pri that is down?

john poole
bellsouth business
columbia,sc

 

[telecomnorth]

Enter "trck pck 1" in LD 60. The 1 references clock 1.

 

[CaperJ]

Your Location: Home / Technical Support / Solution Detail
United States | English [Change]

Solution Detail

How to get clock controller cards to sync

--------------------------------------------------------------------------------

Problem Description

Goal:
How to get clock controller cards to sync

Fact:
Succession 4.0



Problem Resolution

Fix:


DIS CC Y in LD 60
LD 73 CLKN prompt out clock Y
LD 73 CLKN prompt enter TMDI loop to clock from
Do not enter any value for PREF
Clock will be in free run now
LD 60 Enter TRCK FRUN
Stat clock should be in FREE RUN
LD 73 set PREF to loop you wish to clock from (Y)
LD 60 DIS CC 0
ENL CC 0
CLOCK SHOULD BE LOCKED TO LOOP Y