Catalyst 3500XL stuck at boot

[danlilea]

Hello,

Hello is the boot sequence on which the 3500XL is stuck(it won't do anything)

C3500XL Boot Loader (C3500-HBOOT-M) Version 12.0(5)XU, RELEASE SOFTWARE (fc1)
Compiled Mon 03-Apr-00 17:47 by swati
 starting...
Base ethernet MAC Address: 00:02:b9:93:2b:80
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 19 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 3612672
flashfs[0]: Bytes used: 3324928
flashfs[0]: Bytes available: 287744
flashfs[0]: flashfs fsck took 5 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading "flash:c3500xl-c3h2s-mz.120-5.WC5.bin"...###################################################################################################################################################################################

File "flash:c3500xl-c3h2s-mz.120-5.WC5.bin" uncompressed and installed, entry point: 0x3000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C3500xl Software (C3500xl-C3H2S-M), Version 12.0(5)WC5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 28-May-02 11:41 by devgoyal
Image text-base: 0x00003000, data-base: 0x0034A3C8


Initializing C3500xl flash...
flashfs[1]: 19 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 3612672
flashfs[1]: Bytes used: 3324928
flashfs[1]: Bytes available: 287744
flashfs[1]: flashfs fsck took 5 seconds.
flashfs[1]: Initialization complete.
...done Initializing C3500xl flash.
C3500xl POST: System Board Test: Passed
C3500xl POST: Daughter Card Test: Passed
C3500xl POST: CPU Buffer Test: Passed
C3500xl POST: CPU Notify RAM Test: Passed
C3500xl POST: CPU Interface Test: Passed
C3500xl POST: Testing Switch Core: Passed
C3500xl POST: Testing Buffer Table: Passed
C3500xl POST: Data Buffer Test: Passed
C3500xl POST: Configuring Switch Parameters: Passed
C3500xl POST: Ethernet Controller Test: Passed
C3500xl POST: MII Test: Passed
cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes of memory.
Processor board ID FAA0428F0RA, with hardware revision 0x00
Last reset from power-on

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:02:B9:93:2B:80
Motherboard assembly number: 73-3903-04
Power supply part number: 34-0971-01
Motherboard serial number: FAA0428A1YU
Power supply serial number: PAC0417023Y
Model revision number: A0
Motherboard revision number: B0
Model number: WS-C3548-XL-EN
System serial number: FAA0428F0RA


Press RETURN to get started!


C3500xl INIT: Complete

00:00:39: %SYS-5-CONFIG: Configured from NVRAM by console
00:00:39: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C3500xl Software (C3500xl-C3H2S-M), Version 12.0(5)WC5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 28-May-02 11:41 by devgoyal

 

[danlilea]

Any ideas on what is to do in this case.
I've also try to reset the 3500XL(hold mode, power up until port 1 led is closed, the release the mode button. But the same thing, no response from the console, can't write the switch