Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cat6500 routing

Status
Not open for further replies.

V98Cubes

Vendor
Jan 17, 2008
50
US
I have a Cat6500 with Sup2's on 12.1 code. It has been a while so I was wandering if someone could explain to me the way in which this device routes Vlans. Looking at the IOS I do not see the classic routing setup and since it has been a long time since I have touched one I do not if you have to go into the routing card on the Sup2 to enable it to route. I am in the process of looking for a book but I thought I would ask anyway.

Thanks
 
If its running 12.1 code most likely its a hybrid box running catos on the layer 2 side and IOS on the msfc (l3) side . On the L3 side you create layer 3 svi's . Then on the catos side you put ports into that vlan for your routing interface. Normally you telnet into the catos side to configure. Then you can session up to slot 16 the msfc and configure the L3 side.
 
Thanks for the input. It looks like I am running IOS on the switch side and I am unable to session to the msfc card. My understanding is the switch was recently updated with new IOS. i can boot the switch from rommon via the boot cmd. Code level 12.1(27b)E4. Here's what I see after issuing the boot cmd.

Cisco Internetwork Operating System Software
IOS (tm) c6sup2_sp Software (c6sup2_sp-SPV-M), Version 12.1(27b)E4, RELEASE SOFTWARE (fc3)
Technical Support: Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Fri 29-Feb-08 14:16 by hqluong
Image text-base: 0x40020EF4, data-base: 0x409599E0


00:00:03: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
00:00:03: %OIR-6-CONSOLE: Changing console ownership to route processor



System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
TAC Support: Copyright (c) 2002 by cisco Systems, Inc.
Cat6k-MSFC2 platform with 131072 Kbytes of main memory

Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Completed! Booting the image.
Self decompressing the image : ################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################# [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JK2SV-M), Version 12.1(27b)E4, RELEASE SOFTWARE (fc3)
Technical Support: Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Fri 29-Feb-08 14:13 by hqluong
Image text-base: 0x40008EF4, data-base: 0x41BED8C0




cisco WS-C6506 (R7000) processor (revision 3.0) with 112640K/18432K bytes of memory.
Processor board ID TSC071200DM
R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
34 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.


Since I have not worked with Cat 6500 in years a lot has changed. Trying to remember things form all those years ago. Any help here would be greatly appriciated.

Thanks,
V
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top