Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cat6 keystones don't fit standard faceplates

Status
Not open for further replies.

yourISguy

IS-IT--Management
May 25, 2005
15
US
Help! We took over a partially complete cabling job and discovered that the CAT6 keystones are non standard. They have the clips similar to Leviton/Hubble, but the keystone doesn't fit in the normal faceplate opening.

The size of these keystones are 3/4 by 5/8 inch. The only marking on them is c6 on the front, and 7-372 F on the back. We don't know the manufacturer.

We've traveled to Graybar and 4 other supply houses and no one has heard or see of these jacks before.

Did I mention there was 300 of them? UGGG

Thanks in advance!
-mike
mike@doctorofficeit.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top