CAT 5 duplicates 1

[ameyUK]

Engineers have installed new switch, and patched thru to ground floor patch panel.. and they didnt follow our naming sequence.. now we ended with so many different duplicate port numbers.. is there any easy solution to this problem... any help will be really appreciated

 

[skip555]

Something like this would help , they used to make one with two remotes and 100 modules / you could look one ebay for the large kit

http://www.idealindustries.com/dc/TestEquipment.nsf

 

[skip555]

link didnt work well scroll down for this

33-840

DataLite™ Cable Identifier with 25 Modules
Identifies and troubleshoots mislabeled
networks
Works on any communication wiring
schematic
Quickly and accurately matches a patch
panel port to its corresponding
workstation
Perfect for debugging poorly identified
wiring closets
Blister carded kit includes one power unit,
25 modules and Cable Assembly

my kit has two test units you can set one to light the remotes red the other to light them green .

we load up the patch panel with 100 modules then plug the test units in and mark the red and green .

 

[ameyUK]

Thank you skip555