Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

castelle faxpress and callmanager 6.1

Status
Not open for further replies.
jm9776

jm9776

Technical User
Aug 21, 2005
16
US
I am currently trying to connect my Castelle Faxpress 5000 to my callmanager 6.1. I have read through the documents from castelle which really do not go into depth. Currently i am connecting it to a vg224 (setup as sccp in callmanager) and wanted to see if any knows what the fxs port settings should be and if i would need to configure the ports as h323 or not and if their is any special settings in callmanager i need to set. From what i ahve read online it seems like i may need to setup the ports as h323 with a pots and voip dial-peer ,but again their really is not much out there as far as documentation. Any help would be appreciated!!!

THanks
 
Status
Not open for further replies.

Similar threads

mikedphones
  • Locked
  • Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
303
mikedphones
mikedphones
Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
355
thepfy
thepfy
R_Inzano
  • Locked
  • Question
Callmanager waiting to pick up a call
Replies
2
Views
128
whykap
whykap
jrothwell
  • Locked
  • Question
CMBE5000 / CUCM and Unity 8.6.2 licensing
Replies
0
Views
149
jrothwell
jrothwell
Geordie12567
  • Locked
  • Question
Maximum concurrent calls on a SIP trunk with CUCM and Cube
Replies
2
Views
349
biglebowski
biglebowski

Part and Inventory Search

Sponsor

Back
Top