Cards/QSIG Question

[tebbing]

If you want to use QSIG, are their any additional cards required to facilitate that type of connection?

I also have a question from a vendor asking if I have any PRI ports available. I know that we don't use PRIs but not sure if there are cards in our cabinets to handle PRI stuff...

I appreciate everyone's help... we're looking at upgrading/replacing our PBX and all these quotes, questions, and research is almost ready to drive me to drink (even more)

Thanks!

Thomas Ebbing

 

[bigindian65]

pri would go in your network shelves in a SLP slot, does he mean slots available or channels on an existing one??

Mato' Was'aka

 

[tebbing]

I'm not sure... I will clarify with him

Thanks!

 

[a12ozbottle]

To use qsig you have to have that feature package enabled.

 

[SL1M1]

If you have the packages you'll require the hardware
PRI's and Dchannels, depending on your switch and your Qsig Signalling..Onboard 'D'Boards or a mixture of OnBoard or Separated MSDL's for Large switch option.

Circuit cables to faceplate or backplane, interconnecting 'D'Channel cables again depending which switch option you have.

Then there will be the programming of course

Cheers !!

 

[acewarlock]

What model and Rls is it?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.