Card Slot 11 in Option 11C 2

[dabble]

Is it possible to install a digital line card in slot 11 on an option 11C?

 

[chrisay59]

Yes

 

[hawks]

Where do you have a slot 11 in the main cab?

 

[chrisay59]

I'm assuming he has an Exp Cab!

 

[hawks]

You have 10 slots per cab that can be programmed as far as I know.

 

[dabble]

It is a single cabinet. I should have remembered in one of my other option 11's that I did in fact put a DLC in slot 11 and it is working just fine. Thanks to all.I've posted my inventory here, just for info.

PRI, 1,
CONF, 29, <Unavailable>
CONF, 30, <Unavailable>
CONF, 31, <Unavailable>
XCT-TDS/MF, 61, <Unavailable>
CONF, 62, <Unavailable>
XCT-TDS/MF, 63, <Unavailable>
CONF, 94, <Unavailable>
CONF, 95, <Unavailable>
DTR , 00, <Unavailable>
DLC , 03, NT8D02EA 04 NNTM1830E25C 0000
DLC , 04, NT8D02EA 04 NNTM1830E1XY 0000
DLC , 05, NT8D02EA 04 NNTM1830DRL9 0000
500 , 06, NT8D09AK 05 NNTM29302PCB0000000
500 , 07, NT8D09AK 08 NNTM1831CW6M0000000
DLC , 08, NT8D02GA 14 NNTMENC6HRFP 0000
XUT , 09, NT8D14BB 04 NNTM18305M580000000
DLC , 10, NT8D02GA 07 NNTM60GHXFZE 0000
DLC , 11, NT8D02GA 07 NNTM60GMX38G 0000

 

[geirendre]

And the two remainding "slots" are/was reserved for
the old MerMail that consisted of three cards
in slot 10 and the two next to the right.

 

[MossEng]

You only get 10 available slots in a single Option 11 cabinet, the print out you posted will be from a 2 (or more) cabinet system. If you look at the inside rear of the cabinet you will see that 'slots 11 and 12' dont even have a backplane connection!

 

[dabble]

Yes, you're correct MOSSENG! I should have thought this through better! Time for another coffee I guess! Thanks for making me see the light!

 

[curtismo]

Also, I don't believe you can have a T1 card in Slot 10; all the docs only talk about slots 1-9 as available for T1 cards.

 

[myarberry]

Hey Dabble can you tell me how to print out that inventory?

 

[acewarlock]

It looks like INV from LD 117




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[911guru]

Yes that is an INV report in LD 117. Here is a capture that sets it up to run once. Wait for the reports to complete before trying to print them! ([!]IN RED[/!])

TTY 07 SCH MTC BUG OSN   11:13
OVL111 IDLE   0 
>logi 911admin
PASS?
########  #######     ##      ##      ##          ###    ########
##       ##     ##  ####    ####      ##         ## ##   ##     ##
##       ##     ##    ##      ##      ##        ##   ##  ##     ##
######    ########    ##      ##      ##       ##     ## ########
##              ##    ##      ##      ##       ######### ##     ##
##       ##     ##    ##      ##      ##       ##     ## ##     ##
########  #######   ######  ######    ######## ##     ## ########

LAST SUCCESSFUL MDP REFRESH :2008-02-16 22:45:38(Local Time)
USING DEPLIST ZIP FILE DOWNLOADED :2008-02-16 22:41:16(est)

.
TTY #07 LOGGED IN 911ADMIN 11:13  20/2/2008 

>ld 117
OAM000

=> inv gen all
Generate card, set & locrpt inventory
Started successfully

=> 
[!]MAT052 Inventory locrpt generation complete


MAT011 Inventory sets generation complete


MAT010 Inventory card generation complete[/!]

=> inv prt all
ALL (Card, Set & Locrpt Inventory)
Card inventory:
20 2 2008 11 14 7, 20 2 2008 11 14 37, 16        
 XCT-TDS/MF, 0, <Unavailable>
 CONF, 1, <Unavailable>
 TMDI, 8, NTRB21AC  
 TMDI, 9, NTRB21AA  
 XCT-TDS/MF, 16, <Unavailable>
 CONF, 17, <Unavailable>
 XCT-TDS/MF, 60, <Unavailable>
 CONF, 61, <Unavailable>
 MGC , 004 0, NTDW60BA 3 NNTMG19Y3274
 CP-PM CS 0, 4 0 1, NTDW61BAE5 3 NNTMG19Y36
 CPPM SS, 4 0 2, NTDW61BAE50003 NNTMG19Y63VACPP, E911LAB_SS2_500, 192.168.200.5
 XUT , 004 0 03, NT8D14CB  01 NNTMENC7TEYF 0745  
 DLC , 004 0 04, NT8D02EA  04 NNTM18303EFM0000000
 DLC , 004 0 06, NT8D02EA 0300TZ00000000000000000
 DSPDB , 004 0 11, NTDW64AA R01 NNTMG19Y2Y45
 DTR , 004 0 14, <Unavailable>
 MFR , 004 0 15, <Unavailable>

Sets inventory:
20 2 2008 11 14 7, 20 2 2008 11 14 15, 34        
 3904, 004 0 04 01, M3904      NTMN03EC 70 01 3BEA0E , 3904  , 6201
 2616, 004 0 04 02, <Unavailable>, 2616  , 6202
 2616, 004 0 06 01, M2616      NT9K16AC 03 04 F66A03 , 2616  , 6301
 1150, 096 0 00 01, 1150 NTYS06AA 66 27 FEA4DE , 1150  , 2911001
 2004P2, 096 0 00 02, 2004P2 NTDU92AA 66  2 E52731 , 2004  , 6102
 2004P1, 096 0 00 03, 2004P1 NT2K00GI 66  0 050891 , 2004  , 2911003
 1140, 096 0 00 04, 1140 NTYS05AA 66 25 2F52C3 , 1140  , 6104
 KEM1, 096 0 00 04, NGKem NTYS08AA  1 4D4547
 KEM2, 096 0 00 04, NGKem NTYS08AA  1 4D4547
 2002P2, 096 0 00 05, 2002P2 NTDU91AA 66  2 FAE620 , 2002  , 6105
 2004P2, 096 0 00 08, 2004P2 NTDU92AA 66  2 F49462 , 2004  , 6108
 1110, 096 0 00 09, 1110 NTYS02AA 66 23 2EDEC5 , 1110  , 6109
 2001P2, 096 0 00 12, 2001P2 NTDU90AA 66  2 E5E1A8 , 2001  , 6112
 2001P2, 096 0 00 14, 2001P2 NTDU90AA 66  2 E5E154 , 2001  , 6114
 VOLO, 104 0 00 01, <Unavailable>, ESTN  , 7001
 VOLO, 104 0 00 02, <Unavailable>, ESTN  , 7002
 VOLO, 104 0 00 03, <Unavailable>, ESTN  , 7003
 VOLO, 104 0 00 04, <Unavailable>, ESTN  , 7004
 VOLO, 104 0 00 05, <Unavailable>, ESTN  , 7005
 VOLO, 104 0 00 06, <Unavailable>, ESTN  , 7006
 VOLO, 104 0 00 07, <Unavailable>, ESTN  , 7007
 VOLO, 104 0 00 08, <Unavailable>, ESTN  , 7008
 VOLO, 104 0 00 09, <Unavailable>, ESTN  , 7009
 VOLO, 104 0 00 10, <Unavailable>, ESTN  , 7010
 2001P2, 104 0 01 01, <Unavailable>, ELIN01, 6501
 2001P2, 104 0 01 02, <Unavailable>, ELIN02, 6502
 2001P2, 104 0 01 03, <Unavailable>, ELIN03, 6503
 2001P2, 104 0 01 04, <Unavailable>, ELIN04, 6504
 2001P2, 104 0 01 05, <Unavailable>, ELIN05, 6505
 2001P2, 104 0 01 06, <Unavailable>, ELIN06, 6506
 2001P2, 104 0 01 07, <Unavailable>, ELIN07, 6507
 2001P2, 104 0 01 08, <Unavailable>, ELIN08, 6508
 2001P2, 104 0 01 09, <Unavailable>, ELIN09, 6509
 2001P2, 104 0 01 10, <Unavailable>, ELIN10, 6510

911Guru

http://pbx-e911.com

 

[phones1]

ld 117 .>inv gen card or inv g c then inv p c. As for the orignal question that made me laugh!!!!

Remember if it doesn't work hit it harder

Scott UK