Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Card needed for Caller ID on Analog station?
- Thread starter chipig
- Start date
Service Conditions
1. Following hardware is required.
a. Using LLC
- PN-4RSTF (Sender)
- PN-4LLCB (LC)
- PZ-PW122 (-48V DC power supply)
b. Using LC
- PN-4RSTF (Sender)
- PN-8LCAD (LC)
Note: In this case, PZ-PW122 (-48V DC power supply) is not required.
1. Following hardware is required.
a. Using LLC
- PN-4RSTF (Sender)
- PN-4LLCB (LC)
- PZ-PW122 (-48V DC power supply)
b. Using LC
- PN-4RSTF (Sender)
- PN-8LCAD (LC)
Note: In this case, PZ-PW122 (-48V DC power supply) is not required.
- Status
Similar threads
- Locked
- Question