Capture PLID info

[BIGLUCY]

BIG LUCY needs help once again.... I know how to capture and save to a file the plids on a SX2000 how is it done on the 200
As always thanks in advance for your help
BL

 

[BIGLUCY]

I'm connecting through Procom Plus I'm not on site

 

[AlfredSpecial]

Hi lucy i am not trained on sx2000 but as you are using procom plus i have a favour to ask.

Do you have a script called telcount and if so could you post the text?

Thanks

 

[ianuk1974]

HI Lucy,

I am not trained on the 200,

But can you not telnet into the sx200 and use the same commands as the sx2000

Ian

 

[BIGLUCY]

No the 2000 and 200 completely different Procom works great I think it maybe CDE32 I get garbage so I bet I need to drop down from VT100 to VT52 like in the 2000

 

[MNboy]

If the SX200 is feature level 2 (lw 18 or 19 - feature level 2) or higher, in form 32 you will see the option to "display all" cde forms.
To captured this information with Procomm, under your setup files for data, set your capture file
options to * write filtered text with no emulation escapes.

Then start capture, display all, and this should do the trick and hopefully save you some time.

or the other high tech method is to copy and paste.