CAP confusion

[jkirkend]

On a MICS, a 7324 has a CAP attached. All CAP buttons are programmed with internal autodials. In several cases, when one of the monitored lines goes off-hook, another station status lights up as being off hook too. For example, dn 509 goes off-hook, button on CAP lights up as it should... but the button programmed on the CAP for dn 503 lights up too. Not not the other way around though. When dn503 goes off-hook - no response from indicator associated with dn509. Any ideas? I've reset the phone and cap.

 

[curlycord]

Does one have an Answer DN for the other?
Same when you try another CAP or are you the client?



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[jkirkend]

Hi - I can't remember now if I checked for answer DNs. I'll go back and check. I haven't tried a different CAP I'll see if I can find a spare. Thanks for your response.