Can't select Merlin-network for PRI

[andyphones]

I'm trying to program a system for Magix networking, right now it is im my shop without a PRI line connected. There is a 100 DCD in slot 5. When I try to select a PRI switch type of Merlin-ntwrk or Merlin-PBX, I get the buzzer sound and does not take the selection. I notice it does take 4ESS or 5ESS. System is set for Hybrid/pbx. What am I doing wrong???

 

[cvrbob]

did you set your LS/GS/DS1 in slot 5 as PRI,

if you put in your B-channels & PRI trunks before this you will need to delete then before you set up slot 5

 

[andyphones]

cvrbob, you were right, I neglected to set the LS/GS/DS1 programming for slot 5 to PRI. I appreciate your expertise.