Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CANT SEE BOSSES ROLLOEVR

Status
Not open for further replies.

Adminman660

Technical User
Mar 22, 2012
26
US
Here is the issue. x2651 has her bosses x2650. Bu when a second call comes in on x2650. She at x2651 cant see or pick it up. Is this normal or is there a work around ?
 
Is there any setup on the extensions to allow 2651 to see this call on their phone (user button, bridged appearance etc).

What handsets?

Does 2651 want their phone to ring when 2650 is called, or just for a button to flash?

| ACSS SME |
 
Yes there is a bridged appearance for the ext. But the second call to 2650. Isnt seen. 1409 sets.
 
you would need a bridged appearance for each line on the 2650 extension as when you set up a bridged appearance it asks you to select the call appearance it will bridge to. If 2650 has 3 call appearances that can receive calls then 2651 needs 3 bridged appearances, or you need to set it so that 2651 can only receive one call and a second automatically forwards to 2650.

| ACSS SME |
 
let the boss calls overflow to a group and program a group button on the secretary phone, if a second call of the boss overflows the group button will blink, pressing the button enables answering the waiting call.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top