Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't save announcements!!!

Status
Not open for further replies.

njadmin

Technical User
Sep 5, 2006
101
US
It looks like the system is not letting me save my announcement on a TN750 board.
here's the error msg:


SPE-A System error; Please try again later 2

I have done this before and it worked fine not sure what's wrong now. System is G3 CMS2 with 1 TN750 and 1 TN2501 (that card is fine)

TIA

Jason
 
The Tn 750's are backed up via a data module. Is still up and OK? The commands "Li data" will show you it and the "sta data xxxx" will show you it's state. Thats how it interfaces the processor carrier and to your tapes or optical diskettes.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read thread690-1323977


 
this is what I have for the stat data

Data Ext/Stn Ext for Stn DM: 7596 Service State: in-service/idle
Port/Channel Number: 01B1517 Maintenance Busy? no
CF Destination Ext:



Connected Ports:

 
Check the flash card: 'status card-mem'. That will show you what's on the card.

Kevin

status card-mem
MEMORY CARD STATUS

Location: 01A Write Protection: NA
Status: inserted Capacity (MB): 8 ATA Card
System Size: medium Number of Erase Pulses:
Card Format: post-G3V8 Translation Storage Space Used (%): 5


File Name Data Present Date Time

translation y 02/01/07 1:00
announcements y 10/07/03 10:29
 
Here's the card stat the last change I made to the announcements was 3-17-05, the only thing added to the system since then was a VAL card but that shouldn't mess with backup up the old one.

MEMORY CARD STATUS

Location: 01A Write Protection: NA
Status: inserted Capacity (MB): 16 ATA Card
System Size: medium Number of Erase Pulses:
Card Format: post-G3V8 Translation Storage Space Used (%): 3


File Name Data Present Date Time

translation y 02/02/07 1:00
announcements y 03/17/05 11:59
firmware n
 
Still can't get his working. The save trans is fine I can't see what might be stopping the save ann.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top