Cant remove superloop

[motox2]

Cannot remove SUPL (40,44,48) in LD 97.
REQ prt
TYPE supl
SUPL

SUPL SUPT SLOT XPEC0 XPEC1

000 STD LEFT 01 0 1 -- - -
004 STD LEFT 02 0 1 -- - -
008 STD LEFT 03 0 1 -- - -
012 STD LEFT 04 0 1 -- - -
016 STD LEFT 05 0 1 -- - -
040 STD LEFT 08 0 1 -- - -
044 STD LEFT 10 0 3 -- - -
048 STD LEFT 09 0 3 -- - -

---------------------------------------

REQ prt
TYPE xpe
XPEC

S0 S1 S2 S3 LOC DIS RGTP

01 000 000 NO 08
02 004 004 NO 08
03 008 008 NO 08
04 012 012 NO 08
05 016 016 NO 08
08 040 040 NO 08
09 048 048 048 048 NO 08
10 044 044 044 044 S0X NO 08

REQ chg
TYPE xpe
XPEC x8

S0 S1 S2 S3 LOC DIS RGTP
08 040 040 NO 08

XPEC NOT EMPTY
SCH5728
XPEC


I do not know how to clear the XPE values "S1, S2, S3" shown above so I can remove the XPE, thus remove the SUPL. Any help would be appreciated. thanks

 

[bhassell2000]

Have you done a tnd on the superloops to make sure nothing is still programmed?


Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[motox2]

Yes I did, there is nothing. I should of mentioned this is a LAB system. so I have only a couple of phones setup.

 

[bhassell2000]

have you disabled the loop and ther XPE?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[motox2]

yes sir

>ld 32
NPR000
.disl 40

NPR003
.
no love there, any other ideas?

below is the only place in software it shows up....
>ld 22
PT2000

REQ prt
TYPE cequ

CEQU
MPED 8D
SUPL 000 004 008 012
016 040 044 048
DDCS
DTCS
XCT 000
CONF 029 030 031
APVL
DTI2
MISP

 

[StanleySteamer]

ld 97
REQ chg
TYPE supl
SUPL 40
SLOT
SUPT
XPE0 x8
XPE1

REQ chg
TYPE xpe
XPEC x8

 

[KCFLHRC]

Yep, you gotta remove the controller before you can remove the superloop

 

[motox2]

Ok on my option 11, I managed to get down to this config...
CEQU
MPED 8D
SUPL 000 004 008 048
DDCS
DTCS
XCT
CONF
APVL
DTI2
MISP

SUPL SUPT SLOT XPEC0 XPEC1

000 STD LEFT 01 0 1 -- - -
004 STD LEFT 04 0 1 -- - -
008 STD LEFT 08 0 1 -- - -
048 STD LEFT 48 0 1 -- - -

REQ prt
TYPE xpSCH0600
TYPE xpe
\PEC
SCH0600
XPEC

S0 S1 S2 S3 LOC DIS RGTP

01 000 000 NO 08
04 004 004 NO 08
08 008 008 NO 08
48 048 048 NO 08

I want to blow away loop 48, but the system wont let me. I have no TN's programmed hence nothing to disable or take out. Any helkp would be great. this is a LAB system, so there is no reason why im trying to do this other than to see if I can. Thanks for the help

 

[KCFLHRC]

That is not an Option 11

 

[KCFLHRC]

LD 97
REQ GHG
TYPE XPE
XPE X48

 

[motox2]

I appreciate the insight KCFLHRC, but that's not very helpful. The software release is 25.30 and may look a little off, but I can assure this is an option 11 (NTAK11BD) that is hanging on the wall in my LAB. I can reload it, but I would rather not. I don't understand either why it looks like 61/81 programming, but it does.

 

[motox2]

my bad, I didn't catch your next post. thank you much for that as well. But still no love in removing 48

 

[KCFLHRC]

Good luck

 

[motox2]

Thanks for your help, much appreciated

 

[KCFLHRC]

I think you have a large system database in a small system and that is giving you all of your grief.

 

[motox2]

yes I decided to do a reload, im sick of messing around with it.

 

[kstaff22]

hey ---i have an opt 11c here and that is the correct config.
Those superloops are embeded-no reason to out .
as you can see on mine I have 96 as a phantom and 100 as virtual


CEQU
MPED 8D
SUPL 000 004 008 012
016 032 036 040
044 048 064 068
072 P096 V100
TDS 000
CONF 029 030 031 062
094 095

DLOP NUM DCH FRM TMDI LCMT YALM T1TE TRSH
TRK 06 23 ESF YES B8S FDL 0 00
PRI 01 23 ESF YES B8S FDL 0 00
02 23 ESF YES B8S FDL 0 00
03 23 ESF YES B8S FDL 0 00
04 23 ESF YES B8S FDL 0 00
05 23 ESF YES B8S FDL 0 00
MISP

REQ ***
OVL000
>ld 97
SCSYS000
MEM AVAIL: (U/P): 2539223 USED U P: 394513 113687 TOT: 3047423
DISK RECS AVAIL: 256
REQ prt
TYPE supl
SUPL

SUPL SUPT SLOT XPEC0 XPEC1

000 STD LEFT 01 0 1 -- - -
004 STD LEFT 02 0 1 -- - -
008 STD LEFT 03 0 1 -- - -
012 STD LEFT 04 0 1 -- - -
016 STD LEFT 05 0 1 -- - -
032 STD LEFT 06 0 1 -- - -
036 STD LEFT 07 0 1 -- - -
040 STD LEFT 08 0 1 -- - -
044 STD LEFT 10 0 3 -- - -
048 STD LEFT 09 0 3 -- - -
064 STD LEFT 11 0 3 -- - -
068 STD LEFT 12 0 3 -- - -
072 STD LEFT 13 0 3 -- - -
096 ---- ---- PHANTOM -- - -
100 VIRTUAL CARDS 65 - 68 85 - 88
128 STD LEFT 32 0 1 33 2 3
132 STD LEFT 34 0 1 35 2 3
136 STD LEFT 36 0 1 37 2 3
140 STD LEFT 38 0 1 39 2 3
144 STD LEFT 40 0 1 41 2 3
148 STD LEFT 42 0 1 43 2 3
152 STD LEFT 44 0 1 45 2 3
156 STD LEFT 46 0 1 47 2 3

REQ prt
TYPE xpe
XPEC

S0 S1 S2 S3 LOC DIS RGTP

01 000 000 NO 08
02 004 004 NO 08
03 008 008 NO 08
04 012 012 NO 08
05 016 016 NO 08
06 032 032 NO 08
07 036 036 NO 08
08 040 040 NO 08
09 048 048 048 048 NO 08
10 044 044 044 044 NO 08
11 064 064 064 064 NO 08
12 068 068 068 068 NO 08
13 072 072 072 072 NO 08
32 128 128 NO 08
33 128 128 NO 08
34 132 132 NO 08
35 132 132 NO 08
36 136 136 NO 08
37 136 136 NO 08
38 140 140 NO 08
39 140 140 NO 08
40 144 144 NO 08
41 144 144 NO 08
42 148 148 NO 08
43 148 148 NO 08
44 152 152 NO 08
45 152 152 NO 08
46 156 156 NO 08
47 156 156 NO 08