Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't put CDr push to work

Status
Not open for further replies.

jocas9

Technical User
Sep 21, 2004
9
PT
Hi, I have a BCM 50 and I have configured to use the Push option. I use Guild FTP to act as a server of ftp and I configure the BCM with the ip address of the server - its mine laptop at this moment - and when I press push to test the bcm, all the times says "Unable to get FTP connection - Destination unreachable". I made a ping, from bcm and it's ok. I have created the IP of the ftp server, my pc, I put the user and password - I create on the bcm and on the ftp server with the same password - but the bcm never reaches the ftp. I have put a sniffer to check what the bcm is doing and I see all except the ftp protocol, he does not start the ftp protocol. Any clue???

Best Regards,

Carlos
 
No need to answer this question, after I installed the 083-CUMULATIVE-PATCH everything works fine.

Thanks the same

Jose Carlos
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top