Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CAN'T PRINT MANUALLY IN DOMAIN

Status
Not open for further replies.
wnterhawk

wnterhawk

MIS
Nov 13, 2001
57
US
We are using an HP 8150 on NT4 in a domain setup. When users are trying to print manually (in this case they want to do envelopes, but that is incedental) the printer will not manually feed. However when thet do the same thing from a work group it works fine. Has anyone seen this, and have any ideas as to why it would happen.

thanks
Len Lambert (WnterHawk)
 
Status
Not open for further replies.

Similar threads

sysmatics
  • Question
Initialize a printer after printing a page
Replies
2
Views
838
sysmatics
sysmatics
R
  • Locked
  • Question
2 users in the same office using 2 different printers both have"GET /eSCL/ScannerStatus HTTP/1.1 Host: localhost:" printed on the top of every paper t
Replies
1
Views
457
DrB0b
DrB0b
vgulielmus
  • Locked
  • Question
Shared printer connected via USB
Replies
4
Views
1K
vgulielmus
vgulielmus
S
  • Locked
  • Question
Sharp BP-50C55 printer User Authentication box
Replies
0
Views
407
SMS1295
S
RGarcia87
  • Locked
  • Question
Print mapping non domain computers
Replies
2
Views
232
Printer Repair
Printer Repair

Part and Inventory Search

Sponsor

Back
Top