Hi, I connected 2 routers through ethernet 0 & ethernet 1 ports bec'z I don't have any serial port, I set up the ip add for both of them & showing line is up & protocol is up still not able to ping, what might be wrong here, please have a look at the show run, Thank you in advance for taking a time to check this.
********Router 1 (3640) Ethernet 1*********
Current configuration : 645 bytes
!
version 12.4
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router0
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
resource policy
no ip address
full-duplex
!
interface Ethernet2/1
ip address 192.168.10.1 255.255.255.0
full-duplex
!
no ip http server
no ip http secure-server
*********Router 2 (2610) Ethernet 0***********
Current configuration : 379 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router2
!
ip subnet-zero
!
interface Ethernet0/0
ip address 192.168.1.20 255.255.255.0
full-duplex
!
ip classless
ip http server
!
********Router 1 (3640) Ethernet 1*********
Current configuration : 645 bytes
!
version 12.4
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router0
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
resource policy
no ip address
full-duplex
!
interface Ethernet2/1
ip address 192.168.10.1 255.255.255.0
full-duplex
!
no ip http server
no ip http secure-server
*********Router 2 (2610) Ethernet 0***********
Current configuration : 379 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router2
!
ip subnet-zero
!
interface Ethernet0/0
ip address 192.168.1.20 255.255.255.0
full-duplex
!
ip classless
ip http server
!