wannaciscobe
Technical User
Hi,
I'm sorry to ask this probably simple question but here goes:
I set up a "learning lab" at home consisting of 3 2501's and one 2916xl and one linksys workgroup switch. Here is what it looks like
2501-----2501------2501
| |
| |
2900 WG Switch
| |
| |
Host 1 Host 2
I'm using rip v1 and I can ping all serial interfaces from all other routers.
I can ping from both hosts to whatever router they are connected to...i.e...E0 or S0 or S1.
What I cannot do is:
Ping from either host to any other interface on the routers.
Is their some obvious thing I'm missing?
Thanks,
Bob
I'm sorry to ask this probably simple question but here goes:
I set up a "learning lab" at home consisting of 3 2501's and one 2916xl and one linksys workgroup switch. Here is what it looks like
2501-----2501------2501
| |
| |
2900 WG Switch
| |
| |
Host 1 Host 2
I'm using rip v1 and I can ping all serial interfaces from all other routers.
I can ping from both hosts to whatever router they are connected to...i.e...E0 or S0 or S1.
What I cannot do is:
Ping from either host to any other interface on the routers.
Is their some obvious thing I'm missing?
Thanks,
Bob