vincentw56
IS-IT--Management
I have a Cisco 804 ISDN router. I am trying to open it up completly. I want it to pass everything through no matter what. For some reason I cannot get it to open up completly. Posted below is the config file. What am I doing wrong? Please be detailed as I have some experience with the IOS but not a lot.
Thanks,
Vincent
Vincent Wright
Web Developer
NSI Software, Inc.
Code:
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
!
!
dial-peer voice 1 pots
no forward-to-unused-port
call-waiting
ring 0
port 1
destination-pattern xxxxxxx
!
dial-peer voice 2 pots
no forward-to-unused-port
call-waiting
ring 0
port 2
destination-pattern xxxxxxx
!
pots country US
ip subnet-zero
no ip source-route
!
isdn switch-type basic-ni
!
!
process-max-time 200
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip access-group 111 in
no ip directed-broadcast
no ip proxy-arp
ip nat inside
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 x
isdn spid2 x
isdn incoming-voice modem
ppp authentication chap pap callin
ppp multilink
!
interface Dialer1
description ISP
ip address negotiated
ip access-group 111 in
no ip directed-broadcast
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip split-horizon
dialer remote-name Cisco1
dialer idle-timeout 300
dialer string x class DialClass
dialer hold-queue 10
dialer load-threshold 10 either
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname x
ppp chap password x
ppp pap sent-username x
ppp multilink
!
ip nat inside source list 18 interface Dialer1 overload
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
map-class dialer DialClass
dialer isdn speed 56
access-list 18 permit 192.168.0.0 0.0.0.255
access-list 111 permit ip any any
access-list 121 deny udp any eq netbios-dgm any
access-list 121 deny udp any eq netbios-ns any
access-list 121 deny udp any eq netbios-ss any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
transport input none
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
!
time-range TIME
periodic daily 0:00 to 23:59
!
end
Thanks,
Vincent
Vincent Wright
Web Developer
NSI Software, Inc.