cant make it work group paging 1

[phonecable5]

Hello everyone
i set up a system with Ip office 500 V2, 9.1.3.0, 8 analog trunks,
and i make a HG for paging on the speakers of each phone
but it didnt work

HG is 400 the ext's in the group are 102, 103, 105, collective ringing (e129 phones)
shortcode :
*711
dial paging
400
0

the code is callling like a normal call, there´s no announcement through the phones
any clue?

 

[intrigrant]

Yes, the e129 aren't system phones which don't support paging.
It is only available on decent phones like 1608, 1616 and all the 9600 phones.

 

[derfloh]

As far as I know they should support paging (auto answer) since 9.1

 

[gregl45]

Have you tried entering SIP_ALLOW_PAGE in the source number tab of the E129's users. I haven't tested with those phones but this works for other SIP devices.

 

[phonecable5]

Well, we make it work, apprantly the cfg.xml was someway corrupted.
Factory reset to all phones, load again the users on the phones, and the paging works like a charm (before this paging and call pickup didnt work)
e129 phones work ok with most recent firmware and previous firmware
Still, the e129 phone are unlikeable for me...

 

[joe2938]

If you activate dnd for example system status does not reflect this, I personally do not like these $49.00 phones. You get what you pay for