Can't log into Star Talk Flash after reinitializing

[tman1087]

I reinitialized the Star Talk, I thought it would be a simple matter of logging back in with the default administrator passwords to set everything up from scratch.

Now it won't let me login at all. The phone system doesn't seem to recognize that it is even there. To get to the login, I have to dial directly to the port.

Anyone know what special code must be used. The manual sure doesn't act like it is a big deal to reinitialize the system.

 

[adh111681]

I had one do that to me last week-I eventually got it going again by just leaving it alone and coming back to it. Have you tried both feature 903 and 983?

 

[Chezzie]

Hi,
You did not mention which revision of Startalk you were
working with....SO, start with Feature 9*1, then Feat 901,
Feat 902 and Feat 903. It depends on the age of your unit, but each one is valid for the feature code lists in various Flashes. You have to do this before it will let you into Feat 983. Good luck!
Chezzie

 

[tman1087]

Well I don't know if it was the leaving it alone part or what, but I went back to the system and it seems to be working now.

I hadn't touched it in 24 hours, but I also hadn't tried 903 yet.

I went to the system, did feature 903 and then 983 worked!

Thank you for the suggestion.