Can't install PCI USB Card in my Pentium II 400Mhz.

[pciusbcard]

Can't installed PCI USB Card in my computer (pentium II 400Mhz,64MB).
System always prompt need to configure PCI USB card driver after i'm doing setup by using installation disc & configure the driver.
When i boot my PC the problem occur.Already removed the driver and add back.Need somebody to advise me.Thanks..

 

[jrbarnett]

What operating system(s) does the machine run?

John

 

[pciusbcard]

I'm using Win98 Second Edition.

 

[paparazi]

This USB card isn't USB2 is it? there are problems when using this newer type with an older spec PC like yours.
If this is the case then try swop it for an older USB1.1
Martin

Replying helps further our knowledge, without comment leaves us wondering.

 

[zepper]

If the card is USB 2.0, you need to install a USB update - should be on the driver CD or diskette that came with the card - it's specific to the chipset on the card.
. If you have never had USB on your system before, just install the card and boot up. Assuming you have kept you W98SE updated to the current MS Service Pak etc., Win should detect it and install generic USB support.
. Then install the USB 2.0 update from the card's cd. That should do it.
. I have USB 2.0 updates on the CD that came with my mobo for Intel, Via, NEC and SiS chips - should match the chipset on your new add-on card. I use W98SE too and it works fine on my system. If you need it, I could attach to an email for you.
.bh.


He who dares not offend cannot be honest. -- Thomas Paine.