Can't get to pix PDM or ping inside interface of pix while on VPN 1

[etaketa]

I can access the pix PDM (pix device manager) and ping the inside interface when im on the network at work, but as soon as i come home and connect to the pix Via VPN, then i can no longer ping the inside interface of the pix or access the PDM. I need to be able to get to the pix. please help.

Building configuration...
: Saved
:
PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password gn8Iu7y8lhYxN8g5 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name ciscopix.com
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list inside_outbound_nat0_acl permit ip any 10.0.0.192 255.255.255.192
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside XXX.XXX.191.98 255.255.255.224
ip address inside 10.0.0.2 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn_ip_pool 10.0.0.200-10.0.0.254
pdm location 10.0.0.200 255.255.255.255 outside
pdm location 10.0.0.192 255.255.255.192 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 69.233.191.97 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 10.0.0.200 255.255.255.255 outside
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-pptp
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto required
vpdn group PPTP-VPDN-GROUP client configuration address local vpn_ip_pool
vpdn group PPTP-VPDN-GROUP client configuration dns 10.0.0.1
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username clicksafety password *********
vpdn enable outside
dhcpd address 10.0.0.100-10.0.0.199 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:76fe126a1eb72ecfc71adc7d56a841d6
: end
[OK]

 

[Hecmeister]

etaketa,

Try this little gem I got from Cisco TAC:

management-access inside

That allows you to ping the inside interface of the Pix from the outside. If you have multiple Pixs VPN'ing to each other, you can use this to test the VPN link by:

ping inside (address of inside interface of remote Pix)

Hope this helps.