I reset my bios in an attempt to resolve another hardware conflict. Now when it boots up, it just sits at the logo screen. If I hold down delete during power-up, text will appear over the logo that says "entering setup..." but it will just sit there. It's been sitting there for 20 min now. How do I get back into setup?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can't get to BIOS Setup on A7V333
- Thread starter fugigoose
- Start date
FireWired1G
Technical User
Disconnect all peripherals except for the keyboard and mouse, then remove/disconnect all internal components except for the video card. You should be able to get into the BIOS setup.
If you used the CMOS clear jumper short-out, ... did you disconnect the jumpers when you're finished?
Remember, for the CMOS to get cleanned completely you have to leave the jumpers shorted at least 15-20 seconds.
ARISTON Engineering Ltd
Michael Vezyrgianopoulos
R&D Manager
Remember, for the CMOS to get cleanned completely you have to leave the jumpers shorted at least 15-20 seconds.
ARISTON Engineering Ltd
Michael Vezyrgianopoulos
R&D Manager
- Status
Similar threads
- Locked
- Question
- Locked
- Question
