Every time I run "activate configuration" (I guess it is the same as "linuxconf --status" under text mode) appears the same message:
I'm running RedHat 7.1 with gnome
"The state of the system is not in sync with the current/updated configurations. You are allowed to make it current, or continue with the current configurations.
Here are the commands to execute
The following command told me something had to be done /etc/rc5.d/S55named start
And the options "Do nothing" "Do It" and "Help" are avalaible in the same window. When I hit "Do it" there's no error messages, but if I take a look to /var/log/messages I can see this messages:
Nov 7 11:36:59 ns1 named [1381]: Starting BIND 9.1.0 -u named
Nov 7 11:36:59 ns1 named [1381]: using 1 CPU
Nov 7 11:36:59 ns1 named: named startup succesful
Nov 7 11:36:59 ns1 named [1383]: loading configuration from '/etc/named.conf'
Nov 7 11:36:59 ns1 named [1383]: the default for the 'auth-nxdomain' option is now 'no'
Nov 7 11:36:59 ns1 named [1383]: no IPv6 interfaces found
Nov 7 11:36:59 ns1 named [1383]: listening on IPv4 interface lo, 127.0.0.1#53
Nov 7 11:36:59 ns1 named [1383]: binding TCP socket: address in use
Nov 7 11:36:59 ns1 named [1383]: listening on IPv4 interface eth0, 200.74.XXX.158#53
Nov 7 11:36:59 ns1 named [1383]: binding TCP socket: address in use
Nov 7 11:36:59 ns1 named [1383]: listening on IPv4 interface eth0, 200.74.XXX.157#53
Nov 7 11:36:59 ns1 named [1383]: binding TCP socket: address in use
Nov 7 11:36:59 ns1 named [1383]: listening on IPv4 interface eth1, 195.69.XXX.245#53
Nov 7 11:36:59 ns1 named [1383]: binding TCP socket: address in use
Nov 7 11:36:59 ns1 named [1383]: running
Nov 7 11:37:03 ns1 named [1383]: lame server on 'ns.senator.org' (in 'senator.org'?): 192.156.196.3#53
Nov 7 11:37:03 ns1 named [1383]: lame server on 'ns.senator.org' (in 'senator.org'?): 192.156.196.1#53
So it seems to be something wrong here, but the service works OK. It is some kind of bug on linuxconf, or there's something wrong with my configuration?
Thanks for reading,
Rafael
I'm running RedHat 7.1 with gnome
"The state of the system is not in sync with the current/updated configurations. You are allowed to make it current, or continue with the current configurations.
Here are the commands to execute
The following command told me something had to be done /etc/rc5.d/S55named start
And the options "Do nothing" "Do It" and "Help" are avalaible in the same window. When I hit "Do it" there's no error messages, but if I take a look to /var/log/messages I can see this messages:
Nov 7 11:36:59 ns1 named [1381]: Starting BIND 9.1.0 -u named
Nov 7 11:36:59 ns1 named [1381]: using 1 CPU
Nov 7 11:36:59 ns1 named: named startup succesful
Nov 7 11:36:59 ns1 named [1383]: loading configuration from '/etc/named.conf'
Nov 7 11:36:59 ns1 named [1383]: the default for the 'auth-nxdomain' option is now 'no'
Nov 7 11:36:59 ns1 named [1383]: no IPv6 interfaces found
Nov 7 11:36:59 ns1 named [1383]: listening on IPv4 interface lo, 127.0.0.1#53
Nov 7 11:36:59 ns1 named [1383]: binding TCP socket: address in use
Nov 7 11:36:59 ns1 named [1383]: listening on IPv4 interface eth0, 200.74.XXX.158#53
Nov 7 11:36:59 ns1 named [1383]: binding TCP socket: address in use
Nov 7 11:36:59 ns1 named [1383]: listening on IPv4 interface eth0, 200.74.XXX.157#53
Nov 7 11:36:59 ns1 named [1383]: binding TCP socket: address in use
Nov 7 11:36:59 ns1 named [1383]: listening on IPv4 interface eth1, 195.69.XXX.245#53
Nov 7 11:36:59 ns1 named [1383]: binding TCP socket: address in use
Nov 7 11:36:59 ns1 named [1383]: running
Nov 7 11:37:03 ns1 named [1383]: lame server on 'ns.senator.org' (in 'senator.org'?): 192.156.196.3#53
Nov 7 11:37:03 ns1 named [1383]: lame server on 'ns.senator.org' (in 'senator.org'?): 192.156.196.1#53
So it seems to be something wrong here, but the service works OK. It is some kind of bug on linuxconf, or there's something wrong with my configuration?
Thanks for reading,
Rafael