Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can't Find HD in Master
- Thread starter Jeanken
- Start date
Are you using the right connector on the IDE cable too? (if its 80 wire, needs to be connected to end connector to be master). Has drive got 2 master jumper settings (one with one without slave) - and if so, are you using the correct one? Does same this happen on the Secondary IDE?
- Status