Can't connect to sco 5.05 from sco 5.04

[mwatix]

I have sco openserver 5.0.5 and can connect to sco 5.0.4 ok using a modem (Motorola or Multitech). But vice-versa I get gabbage. Is there anything I should do.

Thanks

 

[tshot]

are the port setting on both identical. also try and exchanging the modems positions




----------------
ur feedback is a very welcome desire

 

[stanhubble]

also look at the inittab and gettydef entries that each system is using.
Is this a uucp, ppp, or terminal session?

 

[mwatix]

In all the remote servers the pointer to gettydefs in the inittab had 'm' while the host had '9600'. Though both labels have the same meaning when I replaced the '9600' with 'm', it worked! Thanx a lot.

 

[PHV]

Not really the same meaning:
m is for fixed rate at 9600
9600 is for cycling between 9600,4800,2400,1200,300,19200.

Hope This Help
PH.