Can't Connect to BCM using IP Address 1

[nsanto17]

but I can PING the address...

Any Ideas where I should start looking..

Nick

 

[endlesswinter]

what happens when you enter the ip from web broser? have you connected from this pc before?

 

[biv343]

Depending on the release, you may need to specify :6800 after the IP in the web browser (i.e,

http://10.10.10.10:6800).

If it still doesn't connect via the browser, but you can ping it, the web server may have hung up - you can try to restart the service via the telnet interface, or give it a reboot.

 

[nsanto17]

It won't let me telnet in.

I have connected many times with PC. I can connect when I try to connect using thr bcm monitor.

I would imagine that the web service needs to be restart.

Any one have any ideas how to do that if I can't get into the BCM via Telnet???

 

[nsanto17]

PROBLEM SOLVED...

Rebotted the BCM by flipping the switch and everything is back to normal...

 

[endlesswinter]

when in doubt...reboot!

 

[biv343]

If you ever have this problem and can't squeeze in a reboot for whatever reason, go to the CLI of the BCM and type:

net stop apache (stops the web service)

may or may not get an error saying the service has already been stopped. Then type:

net start apache

That restarts the web services, and you're back in the land of the living.