Cant configure RAID in FCLI mode of FC4500

[kewitz]

hello
i read the fcli setup, i managed to get into the fcli mode, but i am not able to configure the unit properly. i have 20 fc fibre disks in two enclosures
for every disk i get more or less the following information

Performance Statistics for Disk Module 0_7
Description: 18 GB SCSI Disk
Drive Vendor: SEAGATE
Drive Model Info: ST318203 CLAR18
Drive Firmware: 3844
Drive Serial #: LRJ47666
Drive Capacity: 0x2141301 sectors
User Space: 0x20B2301 sectors
Zeroed_Mark: 0x8F000
Additional Info 1: DG118030147

Raid Group (hex): 0x00
Number of units: 0
L2 Cache capacity: 0 bytes
State: UNBOUND
This Disk Module is Not Part of Any Logical Unit
Read Requests: 2
Write Requests: 2095
Kbytes Read: 1
Kbytes Written: 364865
Average Disk Service Time: 424 ms
Average Disk Busy/Idle Time: 8911 / 50251 ms


>>>>>the command


bind all
generates the following

bind: Binding disk 0_0 (FRU 0)
bind: Binding disk 0_1 (FRU 1)
bind: Binding disk 0_2 (FRU 2)
bind: Binding disk 0_3 (FRU 3)
bind: Binding disk 0_4 (FRU 4)
bind: Binding disk 0_5 (FRU 5)
bind: Binding disk 0_6 (FRU 6)
bind: Binding disk 0_7 (FRU 7)

05/13/2005 17:50:56
fcli> RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Disk: Category 0x5 Num 0x4 Type 0x1

Sunburst Code: HOST_BIND_BAD_FRU_CONFIGURATION
Status recv'd opcode 0x81 status 0x50040101
HI_BIND
RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Disk: Category 0x5 Num 0x4 Type 0x1

Sunburst Code: HOST_BIND_BAD_FRU_CONFIGURATION
Status recv'd opcode 0x81 status 0x50040101
HI_BIND
RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Disk: Category 0x5 Num 0x4 Type 0x1

Sunburst Code: HOST_BIND_BAD_FRU_CONFIGURATION
Status recv'd opcode 0x81 status 0x50040101
HI_BIND
RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Disk: Category 0x5 Num 0x4 Type 0x1

Sunburst Code: HOST_BIND_BAD_FRU_CONFIGURATION
Status recv'd opcode 0x81 status 0x50040101
HI_BIND
RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Disk: Category 0x5 Num 0x4 Type 0x1


Status recv'd opcode 0x81 status 0x50040101
HI_BIND
RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Disk: Category 0x5 Num 0x4 Type 0x1

Sunburst Code: HOST_BIND_BAD_FRU_CONFIGURATION
Status recv'd opcode 0x81 status 0x50040101
HI_BIND
RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Disk: Category 0x5 Num 0x4 Type 0x1

Sunburst Code: HOST_BIND_BAD_FRU_CONFIGURATION
Status recv'd opcode 0x81 status 0x50040101
HI_BIND
RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Disk: Category 0x5 Num 0x4 Type 0x1

Sunburst Code: HOST_BIND_BAD_FRU_CONFIGURATION
Status recv'd opcode 0x81 status 0x50040101
HI_BIND



>>>>and the command

bind r0 0_0 0_1 0_2 0_3 0_4

05/13/2005 17:52:54
fcli> RB error full 0x50040101
part category 0x5 code 0x5004 error num 0x4 status 0x1 type 0x1
Bind ERROR: Bind Array: Category 0x5 Num 0x4 Type 0x1

Sunburst Code: HOST_BIND_BAD_FRU_CONFIGURATION
Status recv'd opcode 0x81 status 0x50040101
HI_BIND


05/13/2005 17:52:56


perhabs you can help me
thx
kewitz

 

[kewitz]

hello is there a way to set the system back to factory settings?
thx