I have a BCM50 with 2 of the analog ports active. I am trying to use Polycom soundstation2s and do a 3 party conference. I have tried to change the Flash ms I have tried flash 2 and flash 71 and neither works. I thought you dialed the first number, pressed flash 2 then when you got dial tone dialed the second number and pressed flash #3 . When I do the first flash 2 it hangs up on the call. Does anyone have any suggestions?? Thank you
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can't Conference with Analog Port using flash, Something I am missing?
- Thread starter viper222
- Start date
- Thread starter
- #2
OK, I got it to work. I did this: Dialed first number, Pressed Flash then *79 because 2 only hung up on the call, then Hung up. Then dialed second number, pressed Flash then *3
Don't know why the book shows it one way and that way didn't work but.....
Don't know why the book shows it one way and that way didn't work but.....
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question