Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

can't change system password R11.0.4.3

Status
Not open for further replies.

azrael2000

Technical User
Jun 10, 2008
982
CA
Hi All.

I've run into an issue where when I try to change the System password when the system requests it at the very beginning, it fails.
The administrator and security go fine, but the system fails.

I had to downgrade to 11.0.4.3 per a customer request, so I rebuilt the card with my manager program, fired up the ip office and I get the error.

Has anyone else run into this?
Find a fix?

Update: doing a reset with the reset button on the back cleared my problem. It wouldn't surprise me if the chassis I got that was supposed to be new... wasn't. It has happened before... (Got me overtime, but still not fun seeing system unlicensed!)

Hope this helps someone else.

Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top