Cant call from freepbx to MD110

[syafrilmp]

hello everyone,

i have MD110 ericsson with dial plan 7xxx and and CUCM 10 with dial plan 8xxx also freePBX 15 with dial plan 9xxx, i do SIP trunk freepbx to cucm and the result is
7xxx > 9xxx = Not OK
7xxx > 8xxx = OK
8xxx > 7xxx = OK
8xxx > 9xxx = OK
9xxx > 7xxx = OK
9xxx > 8xxx = OK

my analyze is dial plan 9xxx need to add in MD110 but i dont know how to config it, can anyone tell me how to do it step by step?

Thank you before

 

[himdp]

It would help a lot if you showed us how you configured the SIP trunk on an MD110

 

[inlsp05]

sip in md110??????i think he run E1 with md - freepbx and sip between CUCM and FREEPBX

PG4E

 

[syafrilmp]

@himdp what configuration do you need

@inlsp05 yep MD110 with CUCM using H.323 trunk and CUCM with freepbx using SIP trunk

should i need to add external destination code in MD110 which is 9xxx that freepbx dial plan?

this is my NADAP in my MD110
<NADAP:LIM=1;NUMBER ANALYSIS DATA
TYPE OF SERIES NUMBER SERIES
EXTENSION NUMBER SERIES 7000 - 7266
7269 - 7929
7970 - 7993
8300
8305 - 8329
8700 - 8979
EXTERNAL DESTINATION CODE 0 - 1
20 - 24
256
28 - 29
3
40 - 43
440 - 441
444
45 - 52
530
540 - 546
560 - 566
571
5720 - 5729
5810 - 5812
5850 - 5852
58530 - 58539
5854 - 5859
588 - 589
60 - 62
66
671
6720 - 6726
6850
6852
68530 - 68544
6880 - 6882
690 - 697
6980 - 6989
793 - 796
8000 - 8299
8330 - 8399
84 - 86

 

[inlsp05]

9xxx not in your external dest code use NANSI

PG4E