Can't browse network

[itpro34]

I have 2003 server. I try to browse the network and there are only two machines showing up. Any idea why?

I have the following installed in my interface properties:

tcp/ip
file/print sharing
client for micrpsoft networks
Thanks

 

[techgrl89]

It seems that we have similar issues. My issues are related to server 2000, but I am suspecting a virus at this point - some malicious activity, as it is intermittent.

 

[petrosky]

Hi there,

Without knowing too much about your setup...you may be having master browser issues at your site/s.

This site is quite a good resource should this be the cause of your problems.

http://nitecruzr.blogspot.com/2005/04/nt-browser-or-why-cant-i-always-see.html

Good luck.

Peter.

Remember- It's nice to be important,
but it's important to be nice

 

[porkchopexpress]

Have you tried restarting the master browser and checking that the master browser resides on the PDCe?

Take a look at the link below it offers alot of advice on troubleshooting missing machines in the browse list.

http://support.microsoft.com/default.aspx?scid=kb;en-us;818092