Can't Add MOH

[wspence]

I have done this plenty of times before, guess I am getting rusty.
Menu > System Program > Exit > Aux Equip > MOH > Enter LINE PORT NUMBER, when I enter 804, 803, 802 or 801, I get the error beep and it does not populate. 801 is assigned as an appearance on the operator, the other 3 are not assigned anywhere. Magix 1.0, card is a 412 TDL.

A GS/LS TRUNK INFORMATION


A Trk SS/PP Type OutMode RelDisc ChannelUnit LS-ID Delay
A 801 1/ 1 LS-ID TouchTone Yes N/A No
A 802 1/ 2 LS-ID TouchTone Yes N/A No
A 803 1/ 3 LS-ID TouchTone Yes N/A No
A 804 1/ 4 LS-ID TouchTone Yes N/A No
A TRUNK INFORMATION


A GENERAL TRUNK INFORMATION


A QCC QCC Extern
A Trk SS/PP RemAccess Pool TlPrfx HldDisc Principal Prty Oper Switch
A 801 1/ 1 No Remote Yes Long 4
A 802 1/ 2 No Remote Yes Long 4
A 803 1/ 3 No Remote Yes Long 4
A 804 1/ 4 No Remote Yes Long 4
A 805 5/ 1 No Remote 70 Yes Long 4
A 806 5/ 2 No Remote 70 Yes Long 4
A 807 5/ 3 No Remote 70 Yes Long 4
A 808 5/ 4 No Remote 70 Yes Long 4
A 809 5/ 5 No Remote 70 Yes Long 4
A 810 5/ 6 No Remote 70 Yes Long 4
A 811 5/ 7 No Remote 70 Yes Long 4
A 812 5/ 8 No Remote 70 Yes Long 4
A 813 5/ 9 No Remote 70 Yes Long 4
A 814 5/10 No Remote 70 Yes Long 4
A 815 5/11 No Remote 70 Yes Long 4
A 816 5/12 No Remote 70 Yes Long 4
A 817 5/13 No Remote 70 Yes Long 4
A 818 5/14 No Remote 70 Yes Long 4
A 819 5/15 No Remote 70 Yes Long 4
A 820 5/16 No Remote 70 Yes Long 4
A 821 5/17 No Remote 70 Yes Long 4
A 822 5/18 No Remote 70 Yes Long 4
A 823 5/19 No Remote 70 Yes Long 4
A 824 5/20 No Remote 70 Yes Long 4
A 825 5/21 No Remote 70 Yes Long 4
A 826 5/22 No Remote 70 Yes Long 4
A 827 5/23 No Remote 70 Yes Long 4

 

[Telecomboy]

Check under hunt groups to see if those lines are assigned there.

 

[merlinman]

Just to be clear:

Hunt Groups = GROUP CALLING

http://home.comcast.net/~merlinman

 

[wspence]

Thanks for the input. All the CO lines, even though there was only 1 CO line connected, were assigned to the Night Service Group. Maybe it was set prior to this system converting to a PRI.