Cannot RDP, print, telnet to other subnet. THis seems to be an upper osi layer issue with routing. We have two subnets connected via pt2pt t1. All pcs have a default gateway of our watchguard then the watchguard has static routes to the pt2pt router for the .2 network. I can ping the other subnet and tracert and get the correct route. I am gettting no deny statements on the watchguard. The wierd thing is that be upgraded from a firebox 700 to a 1250e and used the same config. I also set default gateway on the pc to the pt2pt router and it works fine> I have changed the MTU settings also. I have given up on WG tech support and the never ending support queue.Any ideas.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cannot RDP, print, telnet to other subnet.
- Thread starter mk81596
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question