Cannot ping or tracert to remote sites

[TheStressFactor]

Ok..everything internally is working fine but now I cannot seem to ping or traceroute to my remote sites. The main sites network is .3.0 and the two remotes are 0.0 and 5.0. Here is my pix config...any help or insight would be greatly appreciated...

PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 intf2 security10
enable password 7DeygvHKjBuxNxrP encrypted
passwd 0fTucaWSYztRT69N encrypted
hostname marinoware.com
domain-name mydomain.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
access-list nonat permit ip 192.168.3.0 255.255.255.0 10.1.1.0 255.255.255.0
access-list 80 permit icmp any any echo-reply
access-list 80 permit icmp any any echo
access-list 80 permit icmp any any information-request
access-list 80 permit icmp any any information-reply
pager lines 24
interface ethernet0 100basetx
interface ethernet1 100basetx
interface ethernet2 auto shutdown
mtu outside 1500
mtu inside 1500
mtu intf2 1500
ip address outside x.x.x.70 255.255.255.240
ip address inside 192.168.3.1 255.255.255.0
ip address intf2 127.0.0.1 255.255.255.255
ip audit info action alarm
ip audit attack action alarm
ip local pool localpool 10.1.1.1-10.1.1.50
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
nat (inside) 1 192.168.3.0 255.255.255.0 0 0
nat (inside) 1 192.168.4.0 255.255.255.0 0 0
nat (inside) 1 192.168.5.0 255.255.255.0 0 0
static (inside,outside) 192.168.3.2 63.102.156.67 netmask 255.255.255.255 0 0
access-group 80 in interface outside
route outside 0.0.0.0 0.0.0.0 63.102.156.65 1
route inside 192.168.0.0 255.255.255.0 192.168.3.6 1
route inside 192.168.1.0 255.255.255.0 192.168.3.6 1
route inside 192.168.4.0 255.255.255.0 192.168.3.6 1
route inside 192.168.5.0 255.255.255.0 192.168.3.6 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.3.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
no sysopt route dnat
ssh timeout 5
vpdn group 1 accept dialin pptp
vpdn group 1 ppp authentication pap
vpdn group 1 ppp authentication chap
vpdn group 1 ppp authentication mschap
vpdn group 1 ppp encryption mppe auto
vpdn group 1 client configuration address local marinowarelocalpool
vpdn group 1 client configuration dns 192.168.3.7
vpdn group 1 client configuration wins 192.168.3.7
vpdn group 1 pptp echo 60
vpdn group 1 client authentication local
vpdn enable outside
terminal width 80
Cryptochecksum:1ac39cb81c85dc8b23d2e6ffb630e0eb

 

[jdl508]

MarinoWare,
hello, If i were you i would just put in a standard
access-list 80 permit icmp any any
as you add more filtering on the accesslist the less functionality will work.
This worked for me
jdl

 

[yizhar]

HI.

You're trying to ping from the pix console, to networks on your "inside", right?

The problem seems to be on one of the routers.

Try to reboot or clear the ARP cache on the router 192.168.3.6

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar